User’s Manual
TM
© 2013 VTech
Printed in China
91-009654-006
INTRODUCTION
I am Jagger The T-RexTM, and my power is yours to command! Tell
me to “go”, and I’ll make the earth shake with my powerful legs! Or
tell me to “eat”, and my spike-like teeth and super-strong jaws will
leave nothing behind!
Turn me into a crane for even more excitement! Hear me rev my engine
and blast my horn! Or fire my drill for some demolition fun! There’s so
much we can do together. Just say the word!
Crane Button
Tail Button
Command
Mode Button
Launch Button
LCD Screen
Talk Button
ON/OFF
Switch
2
Sound Button
Style Button
Volume Button
INCLUDED IN THIS PACKAGE
•
•
•
•
One VTech® Switch & Dinos®: Jagger The T-RexTM
One small bulldozer
One Switch & Dinos® poster
One user’s manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging locks
and tags are not part of this toy, and should be discarded for your
child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous les
produitsd’emballagetelsquerubansadhésifs, feuillesdeplastique,
attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit.
3. Install 4 new “AA” (LR6/AM-3) batteries
into the main unit following the diagram
inside the battery box. (The use of new,
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover.
3
BATTERY NOTICE
•
•
•
Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
•
•
•
•
•
•
•
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if
removable).
•
Rechargeable batteries are only to be charged under adult
supervision.
PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn the unit ON.
2. STYLE BUTTON
Press the Style Button to choose a driver or change the dino eyes.
3. TALK BUTTON
Press the Talk Button to hear the dino or driver talk.
4. SOUND BUTTON
Press the Sound Button to hear cool sound effects.
4
5. VOLUME BUTTON
Press the Volume Button to adjust the volume.
6. LAUNCH BUTTON
Press the Launch Button to fire the drill.
7. TAIL BUTTON
Press the Tail Button to turn on the truck’s
headlights or make the dino roar. Jagger
will also roar if you lift his tail.
8. CRANE BUTTON
To adjust the crane’s height, hold down the Crane Button and
move the crane up to one of three positions. Release the button
to lock the crane in place.
Note: Please make sure the crane is in the bottom position before
switching the truck to a dino.
9. COMMAND MODE BUTTON
Press the Command Mode Button to enter Command Mode, and
Jagger will teach you how to command him. For more details about
Command Mode, please see the “How to Use Voice Commands”
section.
10. TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF switch to OFF to turn the unit OFF, or hold the
Talk Button for a few seconds to put the unit into sleep mode.
To preserve battery life, the unit will automatically go to sleep after
several minutes without input.
HOW TO USE VOICE COMMANDS
Jagger responds to 12 different commands in each mode.
Before you can give a command, you have to get Jagger’s attention.
5
Say “Hello T-Rex” if he’s a dino, or “Hello Truck Driver” if he’s a truck.
Wait for Jagger to respond. Then say one of the commands. If Jagger
hears you, he’ll follow your command. But if he says “Let’s try again
later”, he’s not listening to you anymore. Say “Hello T-Rex” or “Hello
Truck Driver” to get his attention, and say the command again.
COMMAND MODE
If you don’t have the Command List with you and you don’t know the
commands, you can press the Command Mode button to have Jagger
give you a reminder.
In Command Mode, Jagger will tell you what command to say. Just
repeat after him. You don’t have to say “Hello T-Rex” or “Hello Truck
Driver” first.
If you want to choose a different command, press the Command
Mode button again. Keep pressing the button until Jagger tells you
the command you’re looking for.
COMMAND LIST:
DINO MODE
Go forward!
TRUCK MODE
Go forward!
Command 1
Command 2
Command 3
Command 4
Command 5
Command 6
Command 7
Command 8
Command 9
Command 10
Command 11
Command 12
Go back!
Go back!
Roar with me!
Fire the drill!
Start your engine!
Fire the drill!
Change your voice!
Go wild!
Turn on the lights!
Let's make some noise!
Let’s race!
Snack time!
Make me laugh!
Talk to me!
Sound the alarm!
Talk to me!
Teach me something!
Go to sleep!
Wrecking machine!
Monster truck!
It’s quitting time!
You’re not so tough!
6
HOW TO SWITCH THE TRUCK TO A DINO
1. Truck shape.
2. Move the crane back.
4. Turn Jagger over onto his
side and flip his leg back.
Make sure it locks into place.
3. Separate the grill on the front
of the truck.
2
1
5. With Jagger still resting on his 6. Slide the grey cover on the leg
side, turn his foot and his big toe
up towards the front and turn his
forward as far as it will go. Then
push the cover up until it locks
7
heel up towards the back.
into place.
8. Dino shape.
7. Turn Jagger over onto his other
side and repeat steps 4, 5,
and 6 with the other leg. Stand
Jagger up when you’re done.
Move his arms down.
Note: To change the dino back into a truck, reverse the order of the
steps above.
Before you can transform the dino’s legs, you have
to unlock them. Pull back the release switch behind
each leg to unlock it. Then, the leg can move forward.
TIPS TO IMPROVE THE DINO’S WALKING MOTION
Jagger’s legs will move up and down as he walks along the ground.
In order to keep the legs moving smoothly, please make sure that the
grey cover on the outside of each leg is in the proper position.
When Jagger turns into a dino, slide the cover forward first.
Then slide it up until it locks in place in the top position.
(See step 6 in the How to Switch section.)
When you turn Jagger into a truck, slide the cover down
to unlock it. Then slide it back into the bottom position.
For best results, place Jagger on a hard surface.
Jagger may not move properly when the batteries are low. If
Jagger’s movements become very slow, please replace the
batteries.
8
If the string attached to the crane gets disconnected, follow the steps
below to reattach it.
1. Tie a small knot at one end of
the string.
2. Feed the knot through the
hole on the crane wheel.
3. Pull the string over to the side
so the knot cannot slip back
out the hole.
INSTRUCTIONS FOR THE DINO POSTER
This product comes with a special dino poster that works with the
VTech® Switch & Go Dinos® App to give you a 3D prehistoric
adventure! To use the poster, please follow the instructions below.
1. Place this poster on a wall or flat vertical surface.
2. Download or update the VTech® Switch & Go Dinos® App from
the App StoreSM for iPhone® and iPad®.
9
3. Hold your device up to the poster until you see the dino’s
appearance change. Tap on the dino and watch it come to life!
More dino posters are available on VTechDinoDen.com.
Have a roaring good time!
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service
mark of Apple Inc.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working, please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
10
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
|